How do I install the Load Resistors for my turn signals?

Installing the Load Resistors is straightforward since they are designed to be plug-and-play. You will generally need to connect one end of the resistor to the positive lead of your LED turn signal and the other end to the ground. This setup allows the resistor to draw additional current, compensating for the reduced load of LED bulbs compared to standard bulbs. Ensure that all connections are secure to avoid any malfunctions. Many users find that they can complete this installation in under 30 minutes with basic tools.

Will these resistors work with any type of motorcycle or scooter?

Yes, these 10W 10Ω Load Resistors are compatible with a wide range of motorcycles and scooters that use LED turn signals. They are particularly helpful for models that experience load-related issues when replacing stock bulbs with LED options. However, it is always a good practice to check your vehicle's specifications and wiring setup for optimal compatibility. Many riders report successful use on various brands after switching to LED lighting setups.

What happens if I don't use a load resistor with my LED turn signals?

Without a Load Resistor, your LED turn signals may either blink too quickly or not function at all, leading to an error light illuminating on your dashboard. This occurs because LED bulbs draw significantly less current than traditional incandescent bulbs, causing the turn signal relay to misinterpret the load. As a result, you could face not just functionality issues but also potential safety concerns while riding. Using these resistors serves as a proactive solution to maintain proper vehicle operation.

Can I use these resistors for other LED lights in my motorcycle?

While these Load Resistors are primarily intended for turn signals, they can also be used for other LED lighting systems on your motorcycle that may require load balancing, such as brake lights or tail lights. This versatility allows you to enhance your entire lighting system by ensuring that the electrical load is appropriately managed. This helps maintain consistent performance and avoids any electrical errors across multiple lighting fixtures.

Are there any specific safety precautions I should take during installation?

Absolutely! When installing Load Resistors, it is vital to ensure that the motorcycle is turned off and to disconnect the battery to prevent any accidental shorts. It's recommended to wear gloves to protect your hands from potential sparks or hot components. Moreover, ensure that resistors are mounted securely and not in contact with any plastics or sensitive electrical components, as they can generate heat during operation. This attention to detail will enhance both safety and efficiency.

How do I know if I need to install Load Resistors?

If you have upgraded to LED turn signals and notice issues such as fast blinking, flickering, or an indicator error light on your dashboard, it is a clear indication that you need Load Resistors. These symptoms indicate that the load on the circuit is insufficient for the existing relay's operation. By installing the resistors, you can stabilize the signal operation, helping ensure your turn signals function accurately and safely.

Can I cut or alter these resistors for my specific needs?

It is highly discouraged to cut or alter the Load Resistors, as doing so can affect their performance. These resistors are designed to provide a specific amount of resistance (10Ω in this case) to function correctly. Altering them could lead to incorrect load balance, resulting in ongoing electrical issues. For unique applications or setups, consider obtaining the proper resistors that cater to your specific requirements instead of modifying the existing ones.

Do I need to buy additional items with the Load Resistors?

Typically, the Load Resistors are a standalone solution for resolving indicator issues when using LED turn signals. However, you might want to consider purchasing additional wiring connectors, heat shrink tubing, or adhesive mounts to enhance the installation process and ensure durability. These extra items can help secure connections and protect the resistors from environmental elements, ensuring a reliable and lasting performance.

How to Shop 4 Pcs Motorcycle LED Turn Signal Decoder Load Online From Ubuy?

It’s easy to shop 4 Pcs Motorcycle LED Turn Signal Decoder Load online from Ubuy. You just have to search for the product, choose your shipping method while checking out and get it delivered to your location.

Is 4 Pcs Motorcycle LED Turn Signal Decoder Load Available to Shop Online in Isle of Man?

Yes, at Ubuy Isle of Man this product is available for you to shop at a reasonable price. The 4 Pcs Motorcycle LED Turn Signal Decoder Load is not available locally but you can trust us with our express shipping services.

How Long Does It Take to Get Product After Placing the Order?

The delivery time of your ordered product varies as per what you've ordered and the shipping method that you've chosen. The estimated delivery time is mentioned during the checkout process, so be carefree while shopping.

Kardne

4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors, 10W 10 Flash Fix Error, Indicator Error Canceller for Scooter, Plug-and-Play Bullet Connectors, Anti-Corrosion Aluminum Housing

The ultimate solution for upgrading to LED turn signals.

Kardne

Item #: 137607888

4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors, 10W 10 Flash Fix Error, Indicator Error Canceller for Scooter, Plug-and-Play Bullet

Q: What are Motorcycle LED Turn Signal Decoder Load Resistors used for?

Motorcycle LED Turn Signal Decoder Load Resistors are designed to prevent electrical issues when using LED turn signals. They work by balancing the load on the lighting circuit, ensuring that the turn signals flash at the correct rate and eliminating any error messages on the dashboard. This is particularly useful when upgrading from traditional incandescent bulbs to energy-efficient LED indicators. For example, if your scooter is showing a fast blink or an error light due to incompatible LED signals, these resistors can effectively resolve that issue.

Q: Where can I buy 4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors in Isle of Man?

You can purchase the 4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors from Ubuy in Isle of Man. Ubuy offers a wide selection of quality automotive accessories, including these important components for your motorcycle. With their reliable service, you can find the specific products you need to optimize your vehicle’s lighting system.

87% of respondents would recommend this to a friend

Item #: 137607888

IMP 17

Price Details

Excluding Shipping & Custom charges ( Shipping and custom charges will be calculated on checkout )

^{*All items will import from US}

Availability : In stock

Imported from USA store

QTY:

Order now and get it around Friday, October 23

Secured transaction

Our Top Logistics Partners

The ultimate solution for upgrading to LED turn signals.

U-Care Warranty:

None

Select a Plan

Fast
Shipping

Free
Return^*

Secure Packaging

100% Original Products

PCI DSS Compliance

ISO 27001 Certified

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120). Recommended power converters Buy Now.

What Stands Out

Error Cancelling

Prevents indicator error messages by fixing flash rates in motorcycles and scooters, ensuring optimal functionality and compliance with traffic regulations.

Durable Design

Constructed with anti-corrosion aluminum housing, providing long-lasting performance in diverse weather conditions, making it reliable for all riders.

Easy Installation

Plug-and-play bullet connectors facilitate quick and easy installation, allowing users to upgrade their motorcycle's lighting system without complicated procedures.

Product Details

Connector Type	Plug-In
Contact Type	2no 2nc
Mounting Type	Plug In Mount
Operation Mode	Automatic
Wattage	10 watts
Coil Resistance	10 ohm
Coil Voltage	12 volts_of_direct_current
Minimum Switching Voltage	12 volts_of_direct_current
Contact Material	Copper Alloy
Brand Name	Kardne
UPC	752811280231
Number of Items	4
Included Components	4 x LED Indicator Resistor
Manufacturer	Kardne
Model	ML-Y200
Part Number	ML-Y200
Brand	Kardne
Country of Origin	This item will be imported from US
Item Weight	0.5 lbs (230 grams)
Date First Available	May 12, 2025

Who Should Buy?

Motorcycle Enthusiasts
Ideal for riders wanting to upgrade to LED signals without experiencing error messages on their motorcycle display.
Scooter Owners
Perfect for scooter users needing a reliable solution for LED turn signal compatibility and error cancellation.
DIY Customizers
Great for hobbyists modifying their motorcycles with LED lights, ensuring proper signaling without complexity.

Non-LED Users
Individuals not using LED turn signals will not benefit from these load resistors at all.

Product Description

4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors, 10W 10 Flash Fix Error, Indicator Error Canceller for Scooter, Plug-and-Play Bullet Connectors, Anti-Corrosion Aluminum Housing

Have any Query? Chat with us

Customer Questions & Answers

Question: How to Shop 4 Pcs Motorcycle LED Turn Signal Decoder Load Online From Ubuy?

Answer: It’s easy to shop 4 Pcs Motorcycle LED Turn Signal Decoder Load online from Ubuy. You just have to search for the product, choose your shipping method while checking out and get it delivered to your location.
Question: Is 4 Pcs Motorcycle LED Turn Signal Decoder Load Available to Shop Online in Isle of Man?

Answer: Yes, at Ubuy Isle of Man this product is available for you to shop at a reasonable price. The 4 Pcs Motorcycle LED Turn Signal Decoder Load is not available locally but you can trust us with our express shipping services.
Question: How Long Does It Take to Get Product After Placing the Order?

Answer: The delivery time of your ordered product varies as per what you've ordered and the shipping method that you've chosen. The estimated delivery time is mentioned during the checkout process, so be carefree while shopping.

Kardne Accessories Editorial Review

4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors, 10W 10 Flash Fix Error, Indicator Error Canceller for Scooter, Plug-and-Play Bullet Connectors, Anti-Corrosion Aluminum Housing are essential for anyone looking to enhance their motorcycle's lighting system. These resistors help eliminate issues like hyper flashing and erratic light behavior when switching to LED signals. Many users have reported that they resolved flickering issues and improved the reliability of their turn signals. Despite minor installation challenges, the plug-and-play design makes them a convenient solution. However, some users noted they may need additional components for complete compatibility with certain models, highlighting a need for thorough compatibility checks before installation.

Customer Reviews & Ratings

4.0

1 customers ratings

5 Star

0%
4 Star

100%
3 Star

0%
2 Star

0%
1 Star

0%

Review this product

Share your thoughts with other customers

Pros

Plug-and-play design for easy installation
Compact size allows for convenient placement
Compatible with various motorcycle models
High-quality construction reduces wear and tear

Cons

May require additional parts for some motorcycle models

Product Price History

Important information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

IMP 17

Order now and get it around Friday, October 23

QTY:

Secured transaction

PCI DSS compliant and ISO 27001:2022 certified, with encrypted payments and full buyer protection on every order.

Our Top Logistics Partners

Fastest cross-border delivery

Features & Benefits

High-quality, durable aluminum housing ensures long-lasting performance.
Easy plug-and-play installation with pre-installed bullet connectors.
Fixes rapid blinking caused by LED conversions for error-free operation.
Compatible with OEM flasher relays and CAN-BUS systems.
Waterproof and shock-resistant design for extreme riding conditions.
Includes 4 decoders for comprehensive motorcycle signal coverage.

Ubuy Assurance

Experience worry-free shopping with 100% original products, PCI DSS-compliant payment security, ISO 27001-certified data protection, the fastest cross-border delivery, free returns ^*, and secure packaging on every order.

4 Pcs Motorcycle LED Turn Signal Decoder Load Resistors, 10W 10 Flash Fix Error, Indicator Error Canceller for Scooter, Plug-and-Play Bullet

IMP 17

Fast Shipping

Free Return*

Secure Packaging

100% Original Products

PCI DSS Compliance

ISO 27001 Certified

What Stands Out

Product Details

Who Should Buy?

Product Description

Customer Questions & Answers

Kardne Accessories Editorial Review

Customer Reviews & Ratings

Review this product

Pros

Cons

Product Price History

Important information

IMP 17

Features & Benefits

Ubuy Assurance

Fast
Shipping

Free
Return^*